Gate rollers allow a sliding gate to easily open and close. As long as these rollers get cleaned and remain aligned, your gate will be in prime operating condition. If the rollers are misaligned, your driveway gate will cease to be functional. You’ll have a noisy gate with rough operation and might find yourself dealing with bigger problems if you don’t correct the problem. In this blog, you will learn what causes gate rollers to fall out of place as well as the process required for fixing misaligned gate rollers.
Causes Of Misaligned Gate Rollers
Before you can start fixing misaligned gate rollers, it’s important to know what causes them. Here are some of the most common causes of misaligned gate rollers:
1. Poor Maintenance
One of the most likely causes of gate rollers becoming misaligned is poor maintenance. More specifically, if you don’t take time to regularly clean dirt and debris from your gate’s tracks and rollers, you’re setting up your gate to fall out of alignment. For this reason, cleaning your gate tracks and rollers is absolutely vital.
2. Wear And Tear
The passage of time can also have an impact on the functionality of gate rollers. Paying attention to the physical state of your rollers will allow you to know when to seek replacements sooner rather than later. That way, you can ideally avoid dealing with a misaligned gate.
3. Loose Parts
Finally, your gate rollers could be misaligned due to being poorly installed or other parts of the gate securing them being too loose. In this case, check your gate for any loose parts and tighten them. Additionally, have a gate technician correct the position of the rollers if the misalignment is the result of poor installation.
Fixing Misaligned Gate Rollers
Now that you understand the cause of misaligned gate rollers, you are ready to learn about fixing them. To successfully go about fixing misaligned gate rollers, use the following tips:
1. Clean Any And All Dirt And Debris
The first step in fixing misaligned gate rollers is to clean out any and all dirt and debris from the tracks and in the rollers. Allowing this buildup can cause the rollers to fall off track, so cleaning the tracks and rollers will make a huge difference.
2. Turn Off The Gate And Disconnect Power
Just like with any maintenance or repair task, you need to take the proper safety precautions first. That’s why you need to turn off your gate opener and then disconnect it from the power source. The last thing you want to do is deal with any injuries from accidentally setting off your gate.
3. Inspect And Adjust The Track
Sometimes misaligned gate rollers can be attributed to misaligned or damaged gate tracks. If you notice anything awry with the gate tracks, adjust the height if necessary or inspect their alignment. Even lubricating the track can make a difference in its operation. After fixing the track, your rollers should be in better shape.
Realign Your Gate Rollers With Gates Repair Houston!
Hopefully, fixing misaligned gate rollers will be less stressful, thanks to the above tips. That said, if you aren’t entirely confident in your abilities to fix your rollers, don’t hesitate to reach out to a gate technician for assistance. After all, you’ll save yourself from additional stress by letting an expert handle it.
That way, you’ll be less likely to deal with the consequences of any mistakes you might make. However, you want to know which gate repair service is the best if you live in Houston. The answer to that question is Gates Repair Houston. Contact us today to get your rollers back on track.